WyzeCam MQTT Control & Monitoring

publish (TOPIC/PREFIX/...)	Message	Purpose	subscribe (TOPIC/PREFIX/...)
set	help	Request a whole bunch of nearly useless help information	help
set	status	Request a JSON payload with connection info	(just TOPIC/PREFIX)
			init
play	""
leds/blue/set	ON / OFF	Turn Blue LED on/off	leds/blue
leds/yellow/set	ON / OFF	Turn Yellow LED on/off	leds/yellow
leds/ir/set	ON / OFF	Turn IR LEDs on/off	leds/ir
ir_cut/set	ON / OFF	Turn IR Cut filter on/off	ir_cut
	#######	Apparently, higher numbers mean darker...	brightness
rtsp_h264_server/set	ON / OFF		rtsp_h264_server
rtsp_mjpeg_server/set	ON / OFF		rtsp_mjpeg_server
night_mode/set	ON / OFF	Manually turn Night Mode on/off	night_mode
night_mode/auto/set	ON / OFF	Enable/Disable Automatic Night Mode	night_mode/auto
		ON = Camera has detected motion	motion
motion/detection/set	ON / OFF	Enable/Disable Motion Detection	motion/detection
motion/led/set	ON / OFF		motion/led
motion/snapshot/set	ON / OFF		motion/snapshot
motion/video/set	ON / OFF		motion/video
motion/mqtt_publish/set	ON / OFF		motion/mqtt_publish
snapshot/image	GET
motion/mqtt_snapshot/set	ON / OFF		motion/mqtt_snapshot
motion/send_mail/set	ON / OFF		motion/send_mail
motion/send_telegram/set	ON / OFF		motion/send_telegram
motion/tracking/set	ON / OFF		motion/tracking
motors/vertical/set	up / down / ""	Adjust Tilt up/down/direct	motors/vertical
motors/horizontal/set	left / right / ""	Adjust Pan left/right/direct	motors/horizontal
motors/set calibrate
remount_sdcard/set	ON
reboot/set	ON
recording/set	ON / OFF		recording
snapshot/set	ON
set	""	Apparently, These are for backward compatibility...