WyzeCam MQTT Backward compatibility
Jump to navigation
Jump to search
From: How to configure a hacked Xiaomi Dafang to work with OpenHAB
To set values via MQTT, the Dafang Hacks firmware uses a TOPIC/PREFIX/set command
| Message | Result |
|---|---|
| reboot | Causes camera to reboot... duh... |
| shutdown | Causes camera to shut down... duh... |
| blue_led_on | |
| blue_led_off | |
| yellow_led_on | |
| yellow_led_off | |
| ir_led_on | |
| ir_led_off | |
| ir_cut_on | |
| ir_cut_off | |
| motor_left | |
| motor_right | |
| motor_up | |
| motor_down | |
| motor_vcalibrate | |
| motor_hcalibrate | |
| motor_calibrate | |
| motor_PTZ | |
| audio_test | |
| h264_start | |
| h264_noseg_start | |
| mjpeg_start | |
| h264_nosegmentation_start | |
| xiaomi_start | |
| rtsp_stop | |
| set_http_password | |
| auto_night_mode_start | |
| auto_night_mode_stop | |
| toggle-rtsp-nightvision-on | |
| toggle-rtsp-nightvision-off | |
| flip-on | |
| flip-off | |
| motion_detection_on | |
| motion_detection_off | |
| set_video_size | |
| set_region_of_interest | |
| offDebug | |
| onDebug | |
| conf_timelapse | |
| conf_audioin | |
| update | |
| show_updateProgress | |
| motion_detection_mail_on | |
| motion_detection_mail_off | |
| motion_detection_led_on | |
| motion_detection_led_off | |
| motion_detection_snapshot_on | |
| motion_detection_snapshot_off | |
| motion_detection_mqtt_on | |
| motion_detection_mqtt_off |
