Difference between revisions of "IoT - ESP-07 Everything!"
Jump to navigation
Jump to search
| (8 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | And, of course, to get more of the gpios... | + | [[File:ESP-07 Everything.png|none|thumb|alt=|And, of course, to get more of the gpios...]] |
| − | |||
| − | Should also accept the ESP-12. I have a few of each module on the way. If | + | This board carries the [[ESP-07]] module. |
| + | |||
| + | [[:File:ESP-07 Everything (KiCAD).tar.gz|The KiCAD files]] | ||
| + | |||
| + | [[:File:Esp-07 Everything (gerbers).zip|The Gerbers]] (v0.1.2 board... Bodges needed...) | ||
| + | [[File:ESP-07 Everything (Physical)(Front).jpg|none|thumb]] | ||
| + | [[File:ESP-07 Everything (Physical)(Back).jpg|none|thumb]] | ||
| + | The boards have arrived. | ||
| + | [[File:ESP-07 Waiting.jpg|none|thumb|Need a module for this...]] | ||
| + | |||
| + | |||
| + | Should also accept the ESP-12. I have a few of each module on the way. Guess I'll find out... | ||
| + | |||
| + | <s>Sadly, the modules will arrive sometime in the middle of next month. :(</s> | ||
| + | |||
| + | <s>Or, Maybe Monday... If Canada Post is more believable that Banggood...</s> | ||
| + | [[File:BangGood Bag.jpg|none|thumb|w00t!]] | ||
| + | [[File:07s & 12s.jpg|none|thumb|Some 12s & some 07]] | ||
| + | So... | ||
| + | |||
| + | Installed an 07 module & spent a day trying to figure out why in hell it wouldn't respond to the programmer. | ||
| + | |||
| + | # The Chip Enable pin needs to be pulled high... DOH! | ||
| + | # GPIO15 needs to be pulled low... (Really? Huh...) | ||
| + | |||
| + | [[File:ESP-07 With Bodges.jpg|none|thumb|Let's play a game of "Spot the Bodges"]] | ||
| + | |||
| + | [[File:More Success.png|none|thumb|But, at least it works...]] | ||
| + | |||
| + | Guess this one gets a respin. | ||
| + | [[File:07 vs 12.jpg|none|thumb|Yes... ESP-12 will fit & work... But...]] | ||
| + | ESP-12 will work (without getting the extra pins), but it'll stick out a bit. | ||
Latest revision as of 14:27, 5 November 2020
This board carries the ESP-07 module.
The Gerbers (v0.1.2 board... Bodges needed...)
(Front).jpg)
(Back).jpg)
The boards have arrived.
Should also accept the ESP-12. I have a few of each module on the way. Guess I'll find out...
Sadly, the modules will arrive sometime in the middle of next month. :(
Or, Maybe Monday... If Canada Post is more believable that Banggood...
So...
Installed an 07 module & spent a day trying to figure out why in hell it wouldn't respond to the programmer.
- The Chip Enable pin needs to be pulled high... DOH!
- GPIO15 needs to be pulled low... (Really? Huh...)
Guess this one gets a respin.
ESP-12 will work (without getting the extra pins), but it'll stick out a bit.
