IoT - ESP-07 Everything!

And, of course, to get more of the gpios...

This board carries the ESP-07 module.

The KiCAD files

The Gerbers (v0.1.2 board... Bodges needed...)

The boards have arrived.

Need a module for this...

Should also accept the ESP-12. I have a few of each module on the way. Guess I'll find out...

Sadly, the modules will arrive sometime in the middle of next month. :(

Or, Maybe Monday... If Canada Post is more believable that Banggood...

w00t!

Some 12s & some 07

So...

Installed an 07 module & spent a day trying to figure out why in hell it wouldn't respond to the programmer.

1. The Chip Enable pin needs to be pulled high... DOH!
2. GPIO15 needs to be pulled low... (Really? Huh...)

Let's play a game of "Spot the Bodges"

But, at least it works...

Guess this one gets a respin.

Yes... ESP-12 will fit & work... But...

ESP-12 will work (without getting the extra pins), but it'll stick out a bit.