Difference between revisions of "Modular ESP Firmware - Baseline - Work Environment"
Jump to navigation
Jump to search
(→Notes) |
|||
Line 42: | Line 42: | ||
Things like <code>lib_deps</code> come to mind... | Things like <code>lib_deps</code> come to mind... | ||
+ | |||
+ | <code>build_flags</code> are a good way to customise compiles from a single codebase onto different devices. | ||
For an in-depth set of documentation, see [https://docs.platformio.org/en/latest/projectconf/# “platformio.ini” (Project Configuration File)]. You can get pretty involved in this file & do a lot to control how things are built. | For an in-depth set of documentation, see [https://docs.platformio.org/en/latest/projectconf/# “platformio.ini” (Project Configuration File)]. You can get pretty involved in this file & do a lot to control how things are built. |
Revision as of 13:33, 2 January 2021
Contents
platformio.ini
Common settings
1 [env]
2 platform = espressif8266
3 ; For now, let's stick with the 8266 family MCUs
4
5 framework = arduino
6
7 monitor_speed = 115200
8 ; I like my serial comms fast. (Without this line you get the default of 9600)
9
10 build_flags = -D DEBUG
11 ; This is just plain handy. You can use it to turn debugging output on/off...
Most ESP8266 Devices
1 [env:esp8266]
2 board = esp07
3 ; Pretty much ANY esp8266 board is an esp07 as far as Platformio is concerned
esp-01
1 [env:esp01]
2 board = esp01
esp-M3
1 [env:espM3]
2 board = esp8285
Notes
You can put as many [env:]
sections in as you like & select one at compile-time based on which particular device you're programming.
You'll also be adding other options to the [env:]
blocks.
Things like lib_deps
come to mind...
build_flags
are a good way to customise compiles from a single codebase onto different devices.
For an in-depth set of documentation, see “platformio.ini” (Project Configuration File). You can get pretty involved in this file & do a lot to control how things are built.