CertGetter - Assign port 80
Jump to navigation
Jump to search
Just as a quick example using pfSense...
Assigning port 80 to CertGetter
- Select Firewall / NAT
- Disable any existing port 80 redirect by clicking on the little blue checkmark on its line
- Scroll way down & click one of the Add buttons
- Select HTTP in the Destination port range boxes
- Put this machines address in the Redirect target IP box
- Select HTTP in the Redirect target port box
- Hit the Save button
- Hit the Apply Changes button
Disconnecting CertGetter from port 80
- Select Firewall / NAT
- Disable CertGetters port 80 redirect by clicking on the little blue checkmark on its line
- Re-enable any pre-existing port 80 redirect by clicking on the (greyed-out) little blue checkmark on its line
- Hit the Apply Changes button
