IoT - Firmware - Coldstuff

platformio.ini

 1 [env]
 2 platform = espressif8266
 3 ; For now, let's stick with the 8266 family MCUs
 4 
 5 framework = arduino
 6 
 7 monitor_speed = 115200
 8 ; I like my serial comms fast.  (Without this line you get the default of 9600)
 9 
10 lib_deps =
11         Adafruit GFX Library
12         Adafruit SSD1306
13         Adafruit BusIO
14         SimpleTimer
15         OneWire
16         DallasTemperature
17         PubSubClient
18 
19 [env:Testing]
20 platform = espressif8266
21 board = esp07
22 framework = arduino
23 build_flags =
24            -D DEBUG      ; This is just plain handy.  Use it to turn debugging output on/off...
25         ;    -D DEBUG0     ; Show extra WiFi Debug info
26         ;    -D DEBUG1
27            -D WAP=0
28 
29 [env:LIVE]
30 platform = espressif8266
31 board = d1_mini
32 framework = arduino
33 build_flags =
34            -D WAP=4

#includes, Defines, etc...

TopSecret.h

1 const char *host = "Device Name";
2 const char *ssid = "SSID";
3 const char *password = "Password";

libraries.h

 1 // WiFi ////////////////////////////////////////////////////////////////////////
 2 #include <ESP8266WiFi.h>
 3 
 4 // MQTT ////////////////////////////////////////////////////////////////////////
 5 #include <PubSubClient.h>
 6 
 7 // OLED ////////////////////////////////////////////////////////////////////////
 8 #include <Wire.h>
 9 #include <Adafruit_GFX.h>
10 #include <Adafruit_SSD1306.h>
11 #include <Fonts/FreeMonoBold12pt7b.h>
12 #include <Fonts/FreeMonoBold9pt7b.h>
13 
14 // DS18B20 /////////////////////////////////////////////////////////////////////
15 #include <OneWire.h>
16 #include <DallasTemperature.h>
17 
18 // Supplimental Stuff //////////////////////////////////////////////////////////
19 #include <SimpleTimer.h>

functions.h

 1 #ifndef FUNCTIONS_H
 2 #define FUNCTIONS_H
 3 
 4 // WiFi ////////////////////////////////////////////////////////////////////////
 5 
 6 void WiFi_init();
 7 
 8 int WiFi_strength();
 9 
10 // MQTT ////////////////////////////////////////////////////////////////////////
11 
12 void MQTT_init();
13 
14 void MQTT_callback(char *topic, byte *payload, int length);
15 void MQTT_reconnect();
16 void MQTT_beacon();
17 
18 void DOtheBloodyMQTT();
19 
20 void MQTT_SendData(float Temp0, float Temp1);
21 
22 // OLED ////////////////////////////////////////////////////////////////////////
23 
24 void SSD1306_init();
25 void SSD1306_title(const char *Title);
26 void SSD1306_Static(const char *Line, int Row);
27 void SSD1306_DisplayTemps();
28 void SSD1306_Dotty();
29 // void SSD1306_StickDude();
30 void DrawStickDude(int DudeNum, int TOP, int LEFT);
31 void DrawStickDude2(int DudeNum, int TOP, int LEFT);
32 void walkStickDude(int TOP, int LEFT);
33 void waveStickDude(int TOP, int LEFT);
34 
35 // DS18B20 /////////////////////////////////////////////////////////////////////
36 
37 int DS18B20_init();
38 float DS18B20_getReading(int deviceNumber);
39 
40 // Supplimental Stuff //////////////////////////////////////////////////////////
41 
42 bool getTimer(unsigned long &timer, unsigned long interval);
43 void blinkLED();                // Just a little function to blink the LED for the beacon function.
44 
45 #endif // FUNCTIONS_H

MQTT.h

 1 #ifndef MQTT_H
 2 #define MQTT_H
 3 
 4 #define MQTT_BUFFER_SIZE (100)       // This number is arbitrary
 5                                     // Topic can be up to 65,536 bytes
 6                                     // Message can be up to 268,435,456 bytes
 7 
 8 char MQTT_outTopic[MQTT_BUFFER_SIZE];
 9 char MQTT_inTopic[MQTT_BUFFER_SIZE];
10 char MQTT_teleTopic[MQTT_BUFFER_SIZE];
11 char MQTT_statTopic[MQTT_BUFFER_SIZE];
12 
13 char MQTT_msg_out[MQTT_BUFFER_SIZE *10];
14 
15 unsigned long beacon_timer = 0;
16 #define BEACON_INTERVAL 30000 // Timer interval for the "keep-alive" status beacon
17 
18 extern char *MQTT_broker;
19 extern char *MQTT_user;
20 extern char *MQTT_pass;
21 extern char *MQTT_ClientName;
22 
23 extern char *WiFi_ssid;
24 
25 #endif  // MQTT_H

DS18B20.h

1 #ifndef DS18B20_H
2 #define DS18B20_H
3 
4 const int oneWireBus = 4;            // Where the sensor(s) connect (GPIO4 == Tarduino D2)
5 
6 OneWire oneWire(oneWireBus);         // Setup a oneWire instance to communicate with any OneWire devices
7 DallasTemperature sensors(&oneWire); // Pass our oneWire reference to Dallas Temperature sensor
8 
9 #endif // DS18B20_H

SSD1306.h

 1 #ifndef SSD1306_H
 2 #define SSD1306_H
 3 
 4 // I2C pins suitable for the ESP-M3-Everything!
 5 const int SSD1306_SDA = 14; // Tarduino D5
 6 const int SSD1306_SCL = 12; // Tarduino D6
 7 
 8 #define SCREEN_WIDTH 128 // OLED display width, in pixels
 9 #define SCREEN_HEIGHT 64 // OLED display height, in pixels
10 
11 Adafruit_SSD1306 display(SCREEN_WIDTH, SCREEN_HEIGHT, &Wire, -1);
12 // Static Information Canvases
13 // Full width of the display
14 // GFXcanvas1 Scanvas1(120, 15);
15 // GFXcanvas1 Scanvas2(120, 15);
16 GFXcanvas1 Scanvas3(120, 15);
17 // Dynamic Information Canvases
18 // Sized specifically for '%5.1f' temperature readings
19 GFXcanvas1 Dcanvas1(55, 12);
20 GFXcanvas1 Dcanvas2(55, 12);
21 // GFXcanvas1 Dcanvas3(55, 12);
22 
23 // GFXcanvas1 StickDude(8, 11);
24 GFXcanvas1 StickDudePIC(8, 12);
25 
26 int row_Y[] = {27, 42, 57}; // Locations the rows in the main screen part (Blue)
27 
28 // 
29 int DottyX = 0; // Initialize the dots position OUTSIDE of the actual loop...
30 
31 #endif // SSD1306_H

StickDude.h

  1 #define DUDE_HEIGHT 12
  2 #define DUDE_WIDTH 8
  3 
  4 static const unsigned char PROGMEM StickDude_wave[][12] = {
  5 
  6     {
  7         B00000000, // .        .
  8         B00001000, // .    0   .
  9         B00011100, // .   000  .
 10         B00001000, // .    0   .
 11         B00001000, // .    0   .
 12         B00011100, // .   000  .
 13         B00101010, // .  0 0 0 .
 14         B01001001, // . 0  0  0.
 15         B00001000, // .    0   .
 16         B00010100, // .   0 0  .
 17         B00100010, // .  0   0 .
 18         B01000001  // . 0     0.
 19     },
 20 
 21     {
 22         B00000000, // .        .
 23         B00001000, // .    0   .
 24         B00011100, // .   000  .
 25         B00001000, // .    0   .
 26         B00001000, // .    0   .
 27         B00111110, // .  00000 .
 28         B01001001, // . 0  0  0.
 29         B00001000, // .    0   .
 30         B00001000, // .    0   .
 31         B00010100, // .   0 0  .
 32         B00100010, // .  0   0 .
 33         B01000001  // . 0     0.
 34     },
 35 
 36     {
 37         B00000000, // .        .
 38         B00001000, // .    0   .
 39         B00011100, // .   000  .
 40         B00001000, // .    0   .
 41         B00001000, // .    0   .
 42         B01111111, // . 0000000.
 43         B00001000, // .    0   .
 44         B00001000, // .    0   .
 45         B00001000, // .    0   .
 46         B00010100, // .   0 0  .
 47         B00100010, // .  0   0 .
 48         B01000001  // . 0     0.
 49     },
 50 
 51     {
 52         B00000000, // .        .
 53         B00001000, // .    0   .
 54         B00011100, // .   000  .
 55         B00001000, // .    0   .
 56         B01001001, // . 0  0  0.
 57         B00111110, // .  00000 .
 58         B00001000, // .    0   .
 59         B00001000, // .    0   .
 60         B00001000, // .    0   .
 61         B00010100, // .   0 0  .
 62         B00100010, // .  0   0 .
 63         B01000001  // . 0     0.
 64     },
 65 
 66     {
 67         B00000000, // .        .
 68         B00001000, // .    0   .
 69         B00011100, // .   000  .
 70         B01001001, // . 0  0  0.
 71         B00101010, // .  0 0 0 .
 72         B00011100, // .   000  .
 73         B00001000, // .    0   .
 74         B00001000, // .    0   .
 75         B00001000, // .    0   .
 76         B00010100, // .   0 0  .
 77         B00100010, // .  0   0 .
 78         B01000001  // . 0     0.
 79     },
 80 };
 81 
 82 int StickDude_wave_height = sizeof(StickDude_wave[0]);
 83 int StickDude_wave_count = sizeof(StickDude_wave) / StickDude_wave_height;
 84 int StickDude_wave_width = 8;
 85 
 86 static const unsigned char PROGMEM StickDude_walk[][12] = {
 87     {
 88         B00000000, // ........
 89         B00001000, // ....0...
 90         B00011100, // ...000..
 91         B00001000, // ....0...
 92         B00001000, // ....0...
 93         B00001110, // ....000.
 94         B00001000, // ....0...
 95         B00001000, // ....0...
 96         B00001000, // ....0...
 97         B00001000, // ....0...
 98         B00001000, // ....0...
 99         B00001000, // ....0...
100     },             // A
101 
102     {
103         B00000000, // ........
104         B00001000, // ....0...
105         B00011100, // ...000..
106         B00001000, // ....0...
107         B00001000, // ....0...
108         B00001110, // ....000.
109         B00001000, // ....0...
110         B00001000, // ....0...
111         B00001000, // ....0...
112         B00001100, // ....00..
113         B00011000, // ...00...
114         B00001000, // ....0...
115     },             // B
116 
117     {
118         B00000000, // ........
119         B00001000, // ....0...
120         B00011100, // ...000..
121         B00001000, // ....0...
122         B00001000, // ....0...
123         B00001110, // ....000.
124         B00001000, // ....0...
125         B00001000, // ....0...
126         B00001100, // ....00..
127         B00001010, // ....0.0.
128         B00001100, // ....00..
129         B00001000, // ....0...
130     },             // C
131 
132     {
133         B00000000, // ........
134         B00001000, // ....0...
135         B00011100, // ...000..
136         B00001000, // ....0...
137         B00001000, // ....0...
138         B00001110, // ....000.
139         B00001000, // ....0...
140         B00001000, // ....0...
141         B00001100, // ....00..
142         B00001010, // ....0.0.
143         B00001010, // ....0.0.
144         B00001000, // ....0...
145     },             // D
146 
147     {
148         B00000000, // ........
149         B00001000, // ....0...
150         B00011100, // ...000..
151         B00001000, // ....0...
152         B00001000, // ....0...
153         B00001110, // ....000.
154         B00001000, // ....0...
155         B00001000, // ....0...
156         B00001000, // ....0...
157         B00001100, // ....00..
158         B00001010, // ....0.0.
159         B00001001, // ....0..0
160     },             // E
161 
162     {
163         B00000000, // ........
164         B00001000, // ....0...
165         B00011100, // ...000..
166         B00001000, // ....0...
167         B00001000, // ....0...
168         B00001110, // ....000.
169         B00001000, // ....0...
170         B00001000, // ....0...
171         B00001000, // ....0...
172         B00001100, // ....00..
173         B00010010, // ...0..0.
174         B00010001, // ...0...0
175     },             // F
176 
177     {
178         B00000000, // ........
179         B00001000, // ....0...
180         B00011100, // ...000..
181         B00001000, // ....0...
182         B00001000, // ....0...
183         B00001110, // ....000.
184         B00001000, // ....0...
185         B00001000, // ....0...
186         B00001000, // ....0...
187         B00010100, // ...0.0..
188         B00100010, // ..0...0.
189         B01000001, // .0.....0
190     },             // G
191 
192     {
193         B00000000, // ........
194         B00001000, // ....0...
195         B00011100, // ...000..
196         B00001000, // ....0...
197         B00001000, // ....0...
198         B00001110, // ....000.
199         B00001000, // ....0...
200         B00001000, // ....0...
201         B00001000, // ....0...
202         B00011000, // ...00...
203         B00100100, // ..0..0..
204         B01000100, // .0...0..
205     },             // H
206 
207 };
208 
209 int StickDude_walk_height = sizeof(StickDude_walk[0]);
210 int StickDude_walk_count = sizeof(StickDude_walk) / StickDude_walk_height;
211 int StickDude_walk_width = 8;
212 
213 static const unsigned char PROGMEM StickDude_beer[][12] = {
214 
215     {
216         B00000000, // ........
217         B00001000, // ....0...
218         B00011100, // ...000..
219         B00001000, // ....0...
220         B00001000, // ....0...
221         B00001000, // ....0...
222         B00001000, // ....0...
223         B00001000, // ....0...
224         B00001000, // ....0...
225         B00001000, // ....0...
226         B00001000, // ....0...
227         B00001100, // ....01..
228     },             // A
229 
230     {
231         B00000000, // ........
232         B00001000, // ....0...
233         B00011100, // ...000..
234         B00001000, // ....0...
235         B00001000, // ....0...
236         B00001000, // ....0...
237         B00001100, // ....00..
238         B00001100, // ....00..
239         B00001100, // ....00..
240         B00001000, // ....0...
241         B00001000, // ....0...
242         B00001100, // ....01..
243     },             // B
244 
245     {
246         B00000000, // ........
247         B00001000, // ....0...
248         B00011100, // ...000..
249         B00001000, // ....0...
250         B00001000, // ....0...
251         B00001100, // ....00..
252         B00001010, // ....0.0.
253         B00001010, // ....0.0.
254         B00001000, // ....0...
255         B00001000, // ....0...
256         B00001000, // ....0...
257         B00001100, // ....01..
258     },             // C
259 
260     {
261         B00000000, // ........
262         B00001000, // ....0...
263         B00011100, // ...000..
264         B00001000, // ....0...
265         B00001000, // ....0...
266         B00001100, // ....00..
267         B00001011, // ....0.00
268         B00001001, // ....0..0
269         B00001000, // ....0...
270         B00001000, // ....0...
271         B00001000, // ....0...
272         B00001100, // ....01..
273     },             // D
274 
275     {
276         B00000000, // ........
277         B00001000, // ....0...
278         B00011100, // ...000..
279         B00001000, // ....0...
280         B00001000, // ....0...
281         B00001101, // ....00.0
282         B00001011, // ....0.00
283         B00001000, // ....0...
284         B00001000, // ....0...
285         B00001000, // ....0...
286         B00001000, // ....0...
287         B00001100, // ....01..
288     },             // E
289 
290     {
291         B00000000, // ........
292         B00001000, // ....0...
293         B00011100, // ...000..
294         B00001000, // ....0...
295         B00001000, // ....0...
296         B00001111, // ....0000
297         B00001001, // ....0..0
298         B00001000, // ....0...
299         B00001000, // ....0...
300         B00001000, // ....0...
301         B00001000, // ....0...
302         B00001100, // ....01..
303     },             // F
304 
305     {
306         B00000000, // ........
307         B00001000, // ....0...
308         B00011100, // ...000..
309         B00001000, // ....0...
310         B00001001, // ....0..0
311         B00001111, // ....0000
312         B00001000, // ....0...
313         B00001000, // ....0...
314         B00001000, // ....0...
315         B00001000, // ....0...
316         B00001000, // ....0...
317         B00001100, // ....01..
318     },             // G
319 
320     {
321         B00000000, // ........
322         B00001000, // ....0...
323         B00011100, // ...000..
324         B00001010, // ....0.0.
325         B00001001, // ....0..0
326         B00001110, // ....000.
327         B00001000, // ....0...
328         B00001000, // ....0...
329         B00001000, // ....0...
330         B00001000, // ....0...
331         B00001000, // ....0...
332         B00001100, // ....01..
333     },             // H
334 
335     {
336         B00000000, // ........
337         B00001000, // ....0...
338         B00011100, // ...000..
339         B00001001, // ....0..0
340         B00001011, // ....0.00
341         B00001100, // ....00..
342         B00001000, // ....0...
343         B00001000, // ....0...
344         B00001000, // ....0...
345         B00001000, // ....0...
346         B00001000, // ....0...
347         B00001100, // ....01..
348     },             // I
349 
350     {
351         B00000000, // ........
352         B00001000, // ....0...
353         B00011100, // ...000..
354         B00001011, // ....0.00
355         B00001010, // ....0.0.
356         B00001100, // ....00..
357         B00001000, // ....0...
358         B00001000, // ....0...
359         B00001000, // ....0...
360         B00001000, // ....0...
361         B00001000, // ....0...
362         B00001100, // ....01..
363     },             // J
364 
365     {
366         B00000000, // ........
367         B00001000, // ....0...
368         B00011100, // ...000..
369         B00001110, // ....000.
370         B00001010, // ....0.0.
371         B00001100, // ....00..
372         B00001000, // ....0...
373         B00001000, // ....0...
374         B00001000, // ....0...
375         B00001000, // ....0...
376         B00001000, // ....0...
377         B00001100, // ....01..
378     },             // K
379 
380     {
381         B00000000, // ........
382         B00001000, // ....0...
383         B00011100, // ...000..
384         B00001110, // ....00..
385         B00001010, // ....0.0.
386         B00001100, // ....00..
387         B00001000, // ....0...
388         B00001000, // ....0...
389         B00001000, // ....0...
390         B00001000, // ....0...
391         B00001000, // ....0...
392         B00001100, // ....01..
393     },             // A
394 
395 };
396 
397 int StickDude_beer_height = sizeof(StickDude_beer[0]);
398 int StickDude_beer_count = sizeof(StickDude_beer) / StickDude_beer_height;
399 int StickDude_beer_width = 8;

The Code

main.cpp

 1 #include "libraries.h"
 2 #include "functions.h"
 3 #include "TopSecret.h"
 4 
 5 SimpleTimer timer;
 6 
 7 void setup()
 8 {
 9   // Enable and turn off the On-board LED
10   // (notice that it's inverted on most ESP boards)
11   pinMode(LED_BUILTIN, OUTPUT);
12   digitalWrite(LED_BUILTIN, HIGH);
13 
14   Serial.begin(115200);
15   delay(500); // Delay to let the ESP get booted before sending out serial data
16   Serial.printf("\n+---------------------------------------+\n");
17   Serial.printf("|  ESP With a little OLED & 2 DS18B20s  |\n");
18   Serial.printf("|  WiFi Enabled...                      |\n");
19   Serial.printf("|  Sends readings out through MQTT...   |\n");
20   Serial.printf("|  Able to respond to MQTT...           |\n");
21   Serial.printf("|  (Now, with excitable StickDude)      |\n");
22   // Serial.printf("+---------------------------------------+\n");
23 
24   // SSD1306 ///////////////////////////////////////////////////////////////////
25   SSD1306_init();
26 
27   // Display static text
28   SSD1306_title("ColdStuff");
29   SSD1306_Static("Beer:", 1);
30   SSD1306_Static("Food:", 2);
31 
32   Serial.printf("| Static Text on-screen                 |\n");
33 
34   SSD1306_Static("  Booting  ", 3);
35 
36   // DS18B20 ///////////////////////////////////////////////////////////////////
37 
38   DS18B20_init();
39 
40   // Interval Timers ///////////////////////////////////////////////////////////
41 
42   Serial.printf("+---------------------------------------+\n");
43   timer.setInterval(80, SSD1306_Dotty);
44   timer.setInterval(20, DOtheBloodyMQTT);
45   // delay(66);
46   timer.setInterval(10000, SSD1306_DisplayTemps);
47 
48   Serial.printf("| Interval Timers running               |\n");
49 
50   WiFi_init();
51 
52   MQTT_init();
53 
54 // SSD1306_StickDude();
55 
56   Serial.printf("#=======================================#\n");
57   Serial.printf("#             Ready To Run.             #\n");
58   Serial.printf("#=======================================#\n");
59 }
60 
61 void loop()
62 {
63   // Run the interval timers
64   // Running processes here in loop() is a synchronous flow.
65   // Running processes via the interval timers is assynchronous.
66   // If your actions don't depend directly on each other,
67   // synchronous flow makes no sense at all...
68   timer.run();
69 }

WiFi.cpp

 1 #include "libraries.h"
 2 #include "functions.h"
 3 
 4 ////////////////////////////////////////////////////////////////
 5 // These exist because the variables are declared elsewhere in
 6 // the project.
 7 extern char *WiFi_ssid;
 8 extern char *WiFi_password;
 9 extern char *WiFi_ClientName;
10 ////////////////////////////////////////////////////////////////
11 
12 // Initialize the WiFi
13 //
14 // If we don't get a connection, we just keep trying forever.
15 // Probably be an idea to eventually just give up, but most
16 // ESP8266 devices are kinda useless without the connection...
17 void WiFi_init()
18 {
19 
20     // We start by connecting to a WiFi network
21     Serial.printf("+---------------------------------------+\n");
22     Serial.printf("| Connecting to: %-22s |\n", WiFi_ssid);
23     Serial.printf("| ");
24 
25     WiFi.mode(WIFI_STA); // Connecting as a STATION
26     WiFi.begin(WiFi_ssid, WiFi_password);
27 
28     int dotcount = 0;
29     while (WiFi.status() != WL_CONNECTED) // Give it a bit of time to establish the WiFi connection...
30     {
31         dotcount++;
32         delay(500);
33         Serial.printf(".");
34         SSD1306_Static("  no WiFi  ", 3);
35     }
36 
37     for (int i = 0; i < (38 - dotcount); i++)
38     {
39         Serial.printf(" ");
40     }
41     Serial.printf("|\n");
42 
43     Serial.printf("| WiFi connected on Channel %-2d          |\n", WiFi.channel());
44     Serial.printf("| IP address: %-15s           |\n", WiFi.localIP().toString().c_str());
45 
46     Serial.printf("| My name is NOT %-22s |\n", wifi_station_get_hostname());
47     Serial.printf("| Really... It's %-22s |\n", WiFi_ClientName);
48 
49     SSD1306_Static(" WiFi good ", 3);
50 
51     // Add "build_flags = -D DEBUG0" to your platformio.ini to get some extra WiFi stats
52 #ifdef DEBUG0
53     WiFi.printDiag(Serial);
54     Serial.printf("RSSI: %d dBm\n", WiFi.RSSI());
55     Serial.print("HostName: ");
56     Serial.print(WiFi.hostname());
57     Serial.println(" !!!!!!!!!  BULLSHIT !!!!!!!!!");
58     // Apparently, the ESP8266WiFi library does not actually support DHCP completely
59     // { https://www.reddit.com/r/arduino/comments/d6mvc7/getting_hostname_from_dhcp_with_esp8266/ }
60     // { https://github.com/esp8266/Arduino/issues/5695 }
61 #endif
62 }
63 
64 int WiFi_strength()
65 {
66         // Serial.printf("RSSI: %d dBm\n", WiFi.RSSI());
67 return (WiFi.RSSI());
68 }

MQTT.cpp

  1 #include "libraries.h"
  2 #include "functions.h"
  3 
  4 #include "MQTT.h"
  5 
  6 WiFiClient espClient;
  7 PubSubClient MQTT_client(espClient);
  8 
  9 void DOtheBloodyMQTT()
 10 {
 11     if (!MQTT_client.connected())
 12     {
 13         MQTT_reconnect();
 14     }
 15     MQTT_client.loop();
 16     MQTT_beacon();
 17 
 18 }
 19 
 20 ////////////////////////////////////////////////////////////////
 21 // MQTT Functions
 22 ////////////////////////////////////////////////////////////////
 23 
 24 void MQTT_init()
 25 {
 26     Serial.printf("+---------------------------------------+\n");
 27     MQTT_client.setServer(MQTT_broker, 1883);
 28     MQTT_client.setCallback(MQTT_callback);
 29 
 30     //  Build the topic names
 31     strcpy(MQTT_inTopic, "cmnd/"); //  in - Commands
 32     strcat(MQTT_inTopic, MQTT_ClientName);
 33     strcat(MQTT_inTopic, "/#");
 34     strcpy(MQTT_teleTopic, "tele/"); // out - Telemetry
 35     strcat(MQTT_teleTopic, MQTT_ClientName);
 36     strcpy(MQTT_statTopic, "stat/"); // out - Status
 37     strcat(MQTT_statTopic, MQTT_ClientName);
 38     strcpy(MQTT_outTopic, "noti/"); // out - Notifications
 39     strcat(MQTT_outTopic, MQTT_ClientName);
 40 
 41     MQTT_reconnect();
 42 }
 43 
 44 void MQTT_callback(char *topic, byte *payload, int length)
 45 {
 46 
 47     char MQTT_msg_in[MQTT_BUFFER_SIZE];
 48     char *MQTT_command = strrchr(topic, '/');
 49 
 50 #ifdef DEBUG
 51     Serial.printf("|                                       |\n");
 52     Serial.printf("| Message arrived                       |\n");
 53     Serial.printf("| Command: %28s |\n", MQTT_command);
 54 #endif
 55 
 56     if (length < MQTT_BUFFER_SIZE)
 57     {
 58         for (int i = 0; i < length; i++)
 59         {
 60             MQTT_msg_in[i] = (char)payload[i];
 61             MQTT_msg_in[i + 1] = '\0';
 62         }
 63 
 64 #ifdef DEBUG
 65         Serial.printf("| Message: %28s |\n", MQTT_msg_in);
 66 #endif
 67         /////////////////////////////////////////////////////
 68         // Message handling goes here...
 69         /////////////////////////////////////////////////////
 70         if (strcmp(MQTT_command, "/lights") == 0)
 71         {
 72             // DoLights(MQTT_msg_in);
 73         }
 74         else if (strcmp(MQTT_command, "/respond") == 0)
 75         {
 76             // DoAnswer(MQTT_msg_in);
 77         }
 78         else if (strcmp(MQTT_command, "/control") == 0)
 79         {
 80             // DoControl(MQTT_msg_in);
 81         }
 82         else
 83         {
 84 #ifdef DEBUG
 85             Serial.printf("| Dunno Whatcha want...                 |\n");
 86 #endif
 87         }
 88     }
 89     else
 90     {
 91 #ifdef DEBUG
 92         Serial.printf("| But, it's TOO Bloody Big!             |\n");
 93 #endif
 94     }
 95 }
 96 
 97 void MQTT_reconnect()
 98 {
 99     // Loop until we're reconnected
100     while (!MQTT_client.connected())
101     {
102         Serial.printf("| Attempting MQTT connection...         |\n");
103         // Create a random client ID
104         String clientId = MQTT_ClientName;
105         clientId += String(random(0xffff), HEX);
106         // Attempt to connect
107         if (MQTT_client.connect(clientId.c_str()))
108         {
109             SSD1306_Static(" MQTT good ", 3);
110             delay(500);
111             SSD1306_Static("           ", 3);
112             Serial.printf("| connected to %-24s |\n", MQTT_broker);
113             Serial.printf("| My Name:  %-27s |\n", MQTT_ClientName);
114             // Once connected, publish an announcement...
115             char MQTT_statTopic_Device[100];
116             strcpy(MQTT_statTopic_Device, MQTT_statTopic);
117             strcat(MQTT_statTopic_Device, "/HELLO");
118             // MQTT_client.publish(MQTT_statTopic_Device, "world");
119             MQTT_client.publish(MQTT_statTopic_Device, WiFi_ssid);
120             // ... and resubscribe
121             MQTT_client.subscribe(MQTT_inTopic);
122         }
123         else
124         {
125 
126             if (WiFi.status() != WL_CONNECTED)
127             {
128                 SSD1306_Static("  no WiFi  ", 3);
129                 Serial.printf("| UH OH!!!  No WiFi!!!                  |\n");
130             }
131             else
132             {
133                 SSD1306_Static("  no MQTT  ", 3);
134             }
135 
136             Serial.printf("|                                       |\n");
137             Serial.printf("| failed, rc=%d                         |\n", MQTT_client.state());
138             Serial.printf("| trying again in 5 seconds             |\n");
139             // Wait 5 seconds before retrying
140             delay(5000);
141         }
142     }
143 }
144 
145 void MQTT_beacon()
146 {
147     /* Beacon signal published at set interval to indicate the device
148    * is still powered up and actively connected to MQTT...
149    * A keepalive of sorts
150    * also updates state within MQTT so it can be captured for
151    * indicator light elsewhere
152    */
153     char MQTT_teleTopic_Device[100];
154     char WiFiSignal[5];
155     strcpy(MQTT_teleTopic_Device, MQTT_teleTopic);
156     strcat(MQTT_teleTopic_Device, "/beep");
157     if (getTimer(beacon_timer, BEACON_INTERVAL))
158     {
159         sprintf(WiFiSignal, "%d dBm", WiFi_strength());
160 
161         // MQTT_client.publish(MQTT_teleTopic_Device, "boop");
162         MQTT_client.publish(MQTT_teleTopic_Device, WiFiSignal);
163         blinkLED();
164 
165 #ifdef DEBUG
166         Serial.printf("| Beacon sent                           |\n");
167 #endif
168     }
169 }
170 
171 void MQTT_Status(char const *Device, char const *Status) // Send status messages
172 {
173     char MQTT_statTopic_Device[100];
174     strcpy(MQTT_statTopic_Device, MQTT_statTopic);
175     strcat(MQTT_statTopic_Device, "/");
176     strcat(MQTT_statTopic_Device, Device);
177 
178 #ifdef DEBUG
179     Serial.printf("}- %16s = %-16s -{\n", Device, Status);
180 #endif
181     MQTT_client.publish(MQTT_statTopic_Device, Status);
182 }
183 
184 void MQTT_SendData(float Temp0, float Temp1)
185 {
186     char MQTT_teleTopic_Device[100];
187     strcpy(MQTT_teleTopic_Device, MQTT_teleTopic);
188     strcat(MQTT_teleTopic_Device, "/");
189     strcat(MQTT_teleTopic_Device, "SENSOR");
190 
191     char JSONstream[100];
192     sprintf(JSONstream,
193             "{\"DS18B20_1\":{\"Temperature\":%5.1f},\"DS18B20_2\":{\"Temperature\":%5.1f}}",
194             Temp0, Temp1);
195     MQTT_client.publish(MQTT_teleTopic_Device, JSONstream);
196     
197 }

DS18B20.cpp

 1 #include "libraries.h"
 2 #include "functions.h"
 3 
 4 #include "DS18B20.h"
 5 
 6 // Start the DS18B20 sensor(s)
 7 // returns number of devices found, if you're interested...
 8 int DS18B20_init()
 9 {
10   Serial.printf("+---------------------------------------+\n");
11   sensors.begin();
12   Serial.printf("|        Sensor(s) initialised          |\n");
13 
14   // Grab a count of devices on the wire
15   int numberOfDevices = sensors.getDeviceCount();
16 
17   Serial.printf("|   Found %2d DS18B20s                   |\n", numberOfDevices);
18 
19   return (numberOfDevices);
20 }
21 
22 // Read a DS18B20 sensor
23 // Accepts a device number (in case you have more than one)
24 // Returns the current reading (Celsius because Farhenheit is for losers)
25 // (If you're a loser...  Change getTempCByIndex to getTempFByIndex :)
26 float DS18B20_getReading(int deviceNumber)
27 {
28   sensors.requestTemperatures();
29   return (sensors.getTempCByIndex(deviceNumber));
30 }

SSD1306.cpp

  1 #include "libraries.h"
  2 #include "functions.h"
  3 
  4 #include "StickDude.h"
  5 
  6 #include "SSD1306.h"
  7 
  8 ////////////////////////////////////////////////////////////////////////////////
  9 // This code is based on using an
 10 // IZOKEE 0.96" SSD1306 based 128x64 OLED (Yellow/Blue) from Amazon
 11 // { https://www.amazon.ca/gp/product/B076PNP2VD/ }
 12 ////////////////////////////////////////////////////////////////////////////////
 13 
 14 // Initialize the display
 15 void SSD1306_init()
 16 {
 17   Serial.printf("+---------------------------------------+\n");
 18   Wire.begin(SSD1306_SDA, SSD1306_SCL); // Select SDA & SCL pins
 19 
 20   { // debug output (StickDude Stats)
 21     Serial.printf("StickDude_wave:        %d\n", sizeof(StickDude_wave));
 22     Serial.printf("StickDude_wave height: %d\n", StickDude_wave_height);
 23     Serial.printf("StickDude_wave count:  %d\n", StickDude_wave_count);
 24     Serial.printf("StickDude_wave width:  %d\n", StickDude_wave_width);
 25 
 26     Serial.printf("StickDude_walk: %d\n", sizeof(StickDude_walk));
 27     Serial.printf("StickDude_walk height: %d\n", StickDude_walk_height);
 28     Serial.printf("StickDude_walk count:  %d\n", StickDude_walk_count);
 29     Serial.printf("StickDude_walk width:  %d\n", StickDude_walk_width);
 30   }
 31 
 32   // SSD1306_SWITCHCAPVCC = generate display voltage from 3.3V internally
 33   if (!display.begin(SSD1306_SWITCHCAPVCC, 0x3C))
 34   {
 35     Serial.printf("| SSD1306 allocation failed             |\n");
 36     for (;;)
 37       ;   // Don't proceed, loop forever
 38           //  Does this ever actually happen?
 39   }
 40 
 41   display.clearDisplay();
 42 
 43   display.dim(true); // These displays are excessively bright
 44 
 45   // Set up the active (changing) parts of the display
 46   Dcanvas1.setFont(&FreeMonoBold9pt7b);
 47   Dcanvas2.setFont(&FreeMonoBold9pt7b);
 48   // Dcanvas3.setFont(&FreeMonoBold9pt7b);
 49 
 50   // Set up the static (non-changing) parts of the display
 51   // Scanvas1.setFont(&FreeMonoBold9pt7b);
 52   // Scanvas2.setFont(&FreeMonoBold9pt7b);
 53   Scanvas3.setFont(&FreeMonoBold9pt7b);
 54 
 55   display.setTextColor(WHITE, BLACK);
 56   display.setTextSize(1);
 57 
 58   Serial.printf("| SSD1306 initialized                   |\n");
 59 }
 60 
 61 // Place static text on the yellow part of the OLED display
 62 // Accepts the string (max 9 characters)
 63 void SSD1306_title(const char *Title)
 64 { // Max 9 characters...
 65   display.setFont(&FreeMonoBold12pt7b);
 66   display.setCursor(0, 14);
 67   display.print(Title);
 68   display.display();
 69 }
 70 
 71 // Place static text on the blue part of the OLED display
 72 // Accepts the string (max 11 characters) and the row number (1-3)
 73 void SSD1306_Static(const char *Line, int Row)
 74 { // Max 11 characters
 75   Scanvas3.fillScreen(BLACK);
 76   Scanvas3.setCursor(0, 11);
 77   Scanvas3.print(Line);
 78   display.drawBitmap(4, row_Y[Row - 1] - 9, Scanvas3.getBuffer(), 120, 15, WHITE, BLACK);
 79 
 80   display.display();
 81 }
 82 
 83 // Create an activity indicator
 84 // Just a little dot that crawls across the bottom edge of the display
 85 int DudeStep = 0;
 86 void SSD1306_Dotty()
 87 {
 88   DottyX++;
 89   if (DottyX > SCREEN_WIDTH)
 90   {
 91     DottyX = 0;
 92   }
 93   if (DudeStep >= StickDude_walk_count)
 94   {
 95     DudeStep = 0;
 96   }
 97   // display.drawPixel(DottyX, SCREEN_HEIGHT - 1, WHITE); // Bottom line
 98   // display.drawPixel(DottyX - 1, SCREEN_HEIGHT - 1, BLACK);
 99   DrawStickDude2(DudeStep, 0, 0);
100   DudeStep++;
101   display.drawBitmap(DottyX, 64 - 12, StickDudePIC.getBuffer(), 8, 12, WHITE, BLACK);
102   display.display();
103 }
104 
105 // Display the temperatures on the pre-formatted OLED display
106 void SSD1306_DisplayTemps()
107 {
108   float Beer = DS18B20_getReading(0); // * .3;
109   float Food = DS18B20_getReading(1); // * -1;
110 
111   char BeerTemp[6];
112   char FoodTemp[6];
113 
114   Dcanvas1.fillScreen(BLACK);
115   if (Beer == -127)
116   {
117     sprintf(BeerTemp, "-----");
118     Beer = 0;
119   }
120   else
121     sprintf(BeerTemp, "%5.1f", Beer);
122 
123   Dcanvas2.fillScreen(BLACK);
124   if (Food == -127)
125   {
126     sprintf(FoodTemp, "-----");
127     Food = 0;
128   }
129   else
130     sprintf(FoodTemp, "%5.1f", Food);
131 
132   Dcanvas1.setCursor(0, 11);
133   Dcanvas1.print(BeerTemp);
134   display.drawBitmap(64, row_Y[0] - 9, Dcanvas1.getBuffer(), 55, 12, WHITE, BLACK);
135 
136   Dcanvas2.setCursor(0, 11);
137   Dcanvas2.print(FoodTemp);
138   display.drawBitmap(64, row_Y[1] - 9, Dcanvas2.getBuffer(), 55, 12, WHITE, BLACK);
139 
140   display.display();
141 
142   MQTT_SendData(Beer, Food);
143 
144   waveStickDude(0, 0);
145   // walkStickDude(0, 0);
146   // waveStickDude(0, 0);
147 
148 #ifdef DEBUG
149   Serial.printf("| Sensor 0: %5s - Sensor 1: %5s     |\n", BeerTemp, FoodTemp);
150 #endif
151 }
152 
153 void DrawStickDude(int DudeNum, int TOP, int LEFT)
154 {
155   // display.clearDisplay();
156   StickDudePIC.fillScreen(BLACK);
157 
158   StickDudePIC.drawBitmap(
159       (0),
160       (0),
161       StickDude_beer[DudeNum], DUDE_WIDTH, DUDE_HEIGHT, 1);
162 
163   // display.display();
164 }
165 
166 void walkStickDude(int TOP, int LEFT)
167 {
168   // Serial.printf("| Loop through StickDudes Poses...      |\n");
169   int FOO;
170 
171   for (FOO = 0; FOO < StickDude_walk_count; FOO++)
172   {
173     {
174       DrawStickDude2(FOO, 0, 0);
175       display.drawBitmap(DottyX, 64 - 12, StickDudePIC.getBuffer(), 8, 12, WHITE, BLACK);
176       display.display();
177       delay(30);
178     }
179   }
180   FOO--;
181   for (; FOO >= 0; FOO--)
182   {
183     {
184       DrawStickDude2(FOO, 0, 0);
185       display.drawBitmap(DottyX, 64 - 12, StickDudePIC.getBuffer(), 8, 12, WHITE, BLACK);
186       display.display();
187       delay(30);
188     }
189   }
190 }
191 
192 void waveStickDude(int TOP, int LEFT)
193 {
194   // Serial.printf("| Loop through StickDudes Poses...      |\n");
195   int FOO;
196 
197   for (FOO = 0; FOO < StickDude_beer_count; FOO++)
198   {
199     {
200       DrawStickDude(FOO, 0, 0);
201       display.drawBitmap(DottyX, 64 - 12, StickDudePIC.getBuffer(), 8, 12, WHITE, BLACK);
202       display.display();
203       delay(60);
204     }
205   }
206   FOO--;
207   for (; FOO >= 0; FOO--)
208   {
209     {
210       DrawStickDude(FOO, 0, 0);
211       display.drawBitmap(DottyX, 64 - 12, StickDudePIC.getBuffer(), 8, 12, WHITE, BLACK);
212       display.display();
213       delay(30);
214     }
215   }
216 }
217 
218 void DrawStickDude2(int DudeNum, int TOP, int LEFT)
219 {
220   // display.clearDisplay();
221   StickDudePIC.fillScreen(BLACK);
222 
223   StickDudePIC.drawBitmap(
224       (0),
225       (0),
226       StickDude_walk[DudeNum], DUDE_WIDTH, DUDE_HEIGHT, 1);
227 
228   // display.display();
229 }

Supplimentary.cpp

 1 #include "libraries.h"
 2 #include "functions.h"
 3 
 4 ////////////////////////////////////////////////////////////////
 5 // Supplimentary Functions
 6 ////////////////////////////////////////////////////////////////
 7 
 8 // Good chance this is entirely useless because SimpleTimer exists...
 9 bool getTimer(unsigned long &timer, unsigned long interval)
10 /* Global timer function, used a lot
11  *
12  * @param unsigned long time - The current timer
13  * @param unsigned long interval - Length of time to run timer
14  *
15  * @return bool True when timer is complete
16  * @return bool False when timer is counting
17  */
18 {
19 
20   if (timer < 1)
21   {
22     timer = millis();
23   }
24 
25   if (millis() - timer >= interval)
26   {
27     timer = 0;
28     return true;
29   }
30 
31   return false;
32 }
33 
34 void blinkLED() // Just a little function to blink the on-board LED for the beacon function.
35 {
36   // On most ESP8266-based modules, GPIO2 is connected to the
37   // on-board LED (& it's inverted... so pulling this GPIO low
38   // will turn on the on-board LED.
39 
40   digitalWrite(LED_BUILTIN, LOW);
41   delay(5);
42   digitalWrite(LED_BUILTIN, HIGH);
43 }