Some debugging functions

I2C_functions.cpp

NOTE: The ESP version of the Arduino core has printf(), The Atmel version does not. If you want to use these functions on an Atmel MCU, you'll have to re-write pretty much EVERY Serial.printf()...

  1 #include "libraries.h"
  2 #include "functions.h"
  3 #include "debug.h"
  4 
  5 void debug_TitleScreen()
  6 {
  7     Serial.printf("\n\n#================================================#\n");
  8     Serial.printf("# %-46s #\n", DeviceName);
  9     Serial.printf("# %-46s #\n", DeviceDesc);
 10     Serial.printf("+------------------------------------------------+\n");
 11     Serial.printf("# WiFi Enabled...                                #\n");
 12     Serial.printf("# Speaks fluent MQTT...                          #\n");
 13     Serial.printf("#================================================#\n");
 14 }
 15 
 16 void debug_ReadyScreen()
 17 {
 18     Serial.printf("#================================================#\n");
 19     Serial.printf("#                 Ready To Run.                  #\n");
 20     Serial.printf("#================================================#\n");
 21 }
 22 
 23 void debug_Separator()
 24 {
 25     Serial.printf("+------------------------------------------------+\n");
 26 }
 27 
 28 void debug_SectionTitle(const char *Title)
 29 {
 30     Serial.printf("| %-46s |\n", Title);
 31 }
 32 
 33 void debug_LineOut(const char *Line)
 34 {
 35     Serial.printf("|    %-43s |\n", Line);
 36 }
 37 
 38 void debug_Action(const char *Line)
 39 {
 40     {
 41         const char *SPACE = "                              ";
 42         char BUFFER[100];
 43         char BUFFER2[100];
 44 
 45         int BuffSize = (23 - (strlen(Line) / 2));
 46 
 47         strcpy(BUFFER, SPACE);
 48         BUFFER[BuffSize] = '\0';
 49 
 50         sprintf(BUFFER2, "%s%s", BUFFER, Line);
 51         Serial.printf("| %-46s |\n", BUFFER2);
 52     }
 53 }
 54 
 55 void debug_Trouble(const char *Line)
 56 {
 57     Serial.printf("* %-46s *\n", Line);
 58 }
 59 
 60 void debug_Success(const char *Line)
 61 {
 62     Serial.printf("+ %-46s +\n", Line);
 63 }
 64 
 65 void debug_ProgressBar0()
 66 {
 67     Serial.printf("| ");
 68 }
 69 
 70 void debug_ProgressBar1()
 71 {
 72     Serial.printf(".");
 73 }
 74 
 75 void debug_ProgressBar2(int dotcount)
 76 {
 77     for (int i = 0; i < (47 - dotcount); i++)
 78     {
 79         Serial.printf(" ");
 80     }
 81     Serial.printf("|\n");
 82 }
 83 
 84 void debug_ESP_info()
 85 {
 86     char Line[46];
 87     // Check and report on the flash memory on this board
 88     debug_SectionTitle("Board flash memory Info");
 89     uint32_t realSize = ESP.getFlashChipRealSize();
 90     uint32_t ideSize = ESP.getFlashChipSize();
 91     FlashMode_t ideMode = ESP.getFlashChipMode();
 92     sprintf(Line, "Flash real id:   %08X", ESP.getFlashChipId());
 93     debug_LineOut(Line);
 94     sprintf(Line, "Flash real size: %u", realSize);
 95     debug_LineOut(Line);
 96     sprintf(Line, "Flash ide  size: %u", ideSize);
 97     debug_LineOut(Line);
 98     sprintf(Line, "Flash ide speed: %u", ESP.getFlashChipSpeed());
 99     debug_LineOut(Line);
100     sprintf(Line, "Flash ide mode:  %s", (ideMode == FM_QIO ? "QIO" : ideMode == FM_QOUT ? "QOUT"
101                                                                   : ideMode == FM_DIO    ? "DIO"
102                                                                   : ideMode == FM_DOUT   ? "DOUT"
103                                                                                          : "UNKNOWN"));
104     debug_LineOut(Line);
105     if (ideSize != realSize)
106     {
107         sprintf(Line, "Flash Chip configuration wrong!");
108     }
109     else
110     {
111         sprintf(Line, "Flash Chip configuration ok.");
112     }
113     debug_LineOut(Line);
114 }