IoT - Collabs - ESP Firmware with Guru
Contents
Modular Firmware
Baseline
This is the basis for pretty much ANY ESP-based firmware project. It'll get your device online.
main.cpp
1 #include "TopSecret.h"
2 #include "functions.h"
3
4 void setup()
5 {
6 Serial.begin(115200);
7 delay(50); // Delay to let the ESP get booted before sending out serial data
8 Serial.printf("\n+---------------------------------------+\n");
9 Serial.printf("| ESP Baseline |\n");
10 Serial.printf("+---------------------------------------+\n");
11
12 setup_wifi();
13
14 // Turn off the On-board LED (notice that it's inverted on most ESP boards)
15 pinMode(LED_BUILTIN, OUTPUT);
16 digitalWrite(LED_BUILTIN, HIGH);
17 }
18
19 void loop()
20 {
21 // put your main code here, to run repeatedly:
22 }
The parts
Work Environment (Platformio/VSC setup)
MQTT
This is intended to be added to the baseline.
You'll need to add:
lib_deps =
PubSubClient
to your platformio.ini file.
main.cpp
Add:
setup_mqtt();
to setup() after the setup_wifi(); call.
Put:
DOtheBloodyMQTT();
inside loop()
The rest of the parts
OTA
Gurus source code...
Ffffffuuuuuuuu......
Configuration HotSpot
Wiegand RFID keypad
NeoPixels
Extreme WIP
This is intended to be added to the baseline.
You'll need to add:
lib_deps =
Adafruit NeoPixel
to your platformio.ini file.
and put
#include <Adafruit_NeoPixel.h>
in your source
Web Serving
TFT Display
Climate Sensing
Energy Monitoring
Modularization Tutorial (WIP)
The source code...
