MCU - Display - TFT

ILI9341 SPI TFT LCD Display Touch Panel

2.8 Inch ILI9341 240x320 SPI TFT LCD Display Touch Panel SPI Serial Port Module

Pins

				Nailbuster Examples
	Label	Signal	{colour}	NodeMCU	Actual
14	T_IRQ		WHI	D1	GPIO5
13	T_DO	(MISO)	GRY	D6	GPIO12
12	T_DIN	(MOSI)	VIO	D7	GPIO13
11	T_CS	SPI select	BLU	D2	GPIO4
10	T_CLK	SPI clk	GRN	D5	GPIO14
9	SDO(MISO)	(MISO)	GRY	D6	GPIO12
8	LED		RED+	VCC	3v3
7	SCK	SPI clk	GRN	D5	GPIO14
6	SDI(MOSI)	(MOSI)	VIO	D7	GPIO13
5	D/C		ORA	D4	GPIO2
4	RESET		YEL	VCC	3v3
3	CS	SPI select	BRN	D8	GPIO15
2	GND		BLK	GND	GND
1	VCC		RED	VCC	3v3

(Why in hell do dev-board makers, & Arduino for that matter, think changing the actual GPIO numbers to some random shit was a good idea???)

Firmware

Seems to work pretty good with Tasmota-Display.

Links

• 2.8″ TOUCH LCD SPI FOR ESP8266 (NODEMCU)
  • Code seems to work...
• Interfacing ESP8266 NodeMCU with ILI9341 TFT display
  • Code seems to work...
    • Once you add #include <Arduino.h> and #include <SPI.h>
    • Aside from tripping over the WDT... :(
      • tft.fillRect() seems to kick the watchdog.
      • testFilledCircles() kicks the watchdog instead of returning.
    • SOLUTION: Add ESP.wdtFeed(); immediately before most calls to the shitty Adafruit library functions.