IoT - ESP-Everything! Programming adaptor

From The TinkerNet Wiki
Revision as of 12:59, 17 October 2020 by Tinker (talk | contribs) (Created page with "So... With an assembled ESP-M3 Everything! board on hand, need a way to talk to these. Initially, a simple adaptor to use an existing USB-Serial...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

So...

With an assembled ESP-M3 Everything! board on hand, need a way to talk to these.

Initially, a simple adaptor to use an existing USB-Serial board. (Guess I'll have to design my own next... :P )

I like these little CJMCU boards

CJMCU top.jpg

They do pretty near everything

CJMCU bottom.jpg

& they're even breadboard friendly...

But, I need to be able to just poke my devices with it, so...

Pogo Pins.jpg

Pogo Pins in a Dupont shell!

Adaptor Layout.jpg

Attached to a bit of proto board along with sockets for the CJMCU board.

Adaptor Wiring.jpg

& wired appropriately.

Adaptor bottom.jpg

Pretty darn simple board...

Adaptor Ready.jpg

Ready to go

Adaptor Usage.jpg

In use...

Retrieved from ‘https://wiki.tinkernet.ca/index.php?title=IoT_-_ESP-Everything!_Programming_adaptor&oldid=979’