IoT - Freezer / Fridge monitoring

From The TinkerNet Wiki
Revision as of 21:22, 27 October 2020 by Tinker (talk | contribs) (Created page with "One or more [https://www.amazon.ca/gp/product/B07J5326LW DS18B20 Thermal Probe](s) to track the temperature in the fridge / freezer. File:Freezer Monitor 1.jpg|none|thumb|Bo...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

One or more DS18B20 Thermal Probe(s) to track the temperature in the fridge / freezer.

Board attached to the underside of a blank plate.
Plate attached to a Wiremold surface box.
(Probably didn't need the Extra Deep box...)


Minor issue noted: Mounting the ESP-Everything! centred on the plate kinda makes the USB port useless. But, there's about 10mm clearance either side. I should be OK just moving the board over.

Once the probes arrive, it'll be time to solder up the board, stick it next to the freezer & beer fridge.

Then testing begins.

Retrieved from ‘https://wiki.tinkernet.ca/index.php?title=IoT_-_Freezer_/_Fridge_monitoring&oldid=1055’