CertGetter - Assign port 80

Just as a quick example using pfSense...

Assigning port 80 to CertGetter

• Select Firewall / NAT
• Disable any existing port 80 redirect by clicking on the little blue checkmark on its line
• Scroll way down & click one of the Add buttons
• Select HTTP in the Destination port range boxes
• Put this machines address in the Redirect target IP box
• Select HTTP in the Redirect target port box
• Hit the Save button
• Hit the Apply Changes button

Disconnecting CertGetter from port 80

• Select Firewall / NAT
• Disable CertGetters port 80 redirect by clicking on the little blue checkmark on its line
• Re-enable any pre-existing port 80 redirect by clicking on the (greyed-out) little blue checkmark on its line
• Hit the Apply Changes button