IoT - TasmOTA
Jump to navigation
Jump to search
Contents
Links
Notes
How-Tos
Things that work accidentally
Apparently, you can get to the various UI pages from the captive portal WiFi setup page by opening a second browser window on your phone & typing their addresses directly. (i.e.: http://192.168.4.1/in or http://192.168.4.1/up etc...)
Control one TasmOTA from another:
(Adrian on the discord)
There are several ways to achieve that in Tasmota. the easiest is:
rule1 1
rule1 on power1#state do publish cmnd/otherswitch/power1 %value% endonin both devices the switch will toggle the local relay and the relay action will toggle the remote one
This happens no matter HOW the toggle is initiated (physical, web, MQTT...).
Note: On this site, the standard format for TasmOTA MQTT is TasmOTA/%topic%/%prefix%/
so...
rule1 1
rule1 on power1#state do publish TasmOTA/D1-Mini-a/cmnd/power1 %value% endonSwitch TasmOTA Web UI to "Dark Mode"
cmnd/topic/webcolor {"WebColor":["#eaeaea","#252525","#4f4f4f","#000000","#dddddd","#65c115","#1f1f1f","#ff5661","#008000",
"#faffff","#1fa3ec","#0e70a4","#d43535","#931f1f","#47c266","#5aaf6f","#faffff","#999999",
"#eaeaea"]}
or... through MQTT:
topic: cmnd/topic/webcolor
payload: {"WebColor":"#eaeaea","#252525","#4f4f4f","#000000","#dddddd","#65c115","#1f1f1f",
"#ff5661","#008000","#faffff","#1fa3ec","#0e70a4","#d43535","#931f1f","#47c266","#5aaf6f",
"#faffff","#999999","#eaeaea"]}
Working example:
mosquitto_pub -h skynet -t TasmOTA/D1-Mini-a/cmnd/webcolor -m '{"WebColor":"#eaeaea",\
"#252525","#4f4f4f","#000000","#dddddd","#65c115","#1f1f1f","#ff5661","#008000","#faffff",\
"#1fa3ec","#0e70a4","#d43535","#931f1f","#47c266","#5aaf6f","#faffff","#999999","#eaeaea"]}'
