Difference between revisions of "MCU - Display - TFT"
Jump to navigation
Jump to search
(→Pins) |
|||
(2 intermediate revisions by the same user not shown) | |||
Line 16: | Line 16: | ||
====Pins==== | ====Pins==== | ||
− | {| class="wikitable" | + | {| class="wikitable sortable" |
|+ | |+ | ||
! | ! | ||
Line 34: | Line 34: | ||
|T_IRQ | |T_IRQ | ||
| | | | ||
− | | | + | |BRN |
|D1 | |D1 | ||
|GPIO5 | |GPIO5 | ||
Line 55: | Line 55: | ||
|T_CS | |T_CS | ||
|SPI select | |SPI select | ||
− | |BLU | + | |BLU (t) |
− | | | + | |D8 |
− | | | + | |GPIO15 |
|- | |- | ||
|10 | |10 | ||
|T_CLK | |T_CLK | ||
|SPI clk | |SPI clk | ||
− | | | + | |WHI |
|D5 | |D5 | ||
|GPIO14 | |GPIO14 | ||
Line 82: | Line 82: | ||
|8 | |8 | ||
|LED | |LED | ||
− | | | + | |pwr LED |
− | |RED | + | |RED |
|<u>VCC</u> | |<u>VCC</u> | ||
− | | | + | |? |
|- | |- | ||
|7 | |7 | ||
|SCK | |SCK | ||
|SPI clk | |SPI clk | ||
− | | | + | |WHI |
|D5 | |D5 | ||
|GPIO14 | |GPIO14 | ||
Line 103: | Line 103: | ||
|5 | |5 | ||
|D/C | |D/C | ||
− | | | + | |Data/Cmnd |
− | | | + | |GRN |
|D4 | |D4 | ||
|GPIO2 | |GPIO2 | ||
Line 110: | Line 110: | ||
|4 | |4 | ||
|RESET | |RESET | ||
− | | | + | |{D3} |
|YEL | |YEL | ||
− | |VCC | + | |VCC {D3} |
− | |3v3 | + | |3v3 {GPIO0} |
|- | |- | ||
|3 | |3 | ||
|CS | |CS | ||
|SPI select | |SPI select | ||
− | | | + | |BLU (s) |
− | | | + | |D2 |
− | | | + | |GPIO4 |
|- | |- | ||
|2 | |2 | ||
|GND | |GND | ||
− | | | + | |pwr GND |
|BLK | |BLK | ||
|GND | |GND | ||
Line 131: | Line 131: | ||
|1 | |1 | ||
|VCC | |VCC | ||
− | | | + | |pwr 3V3 |
− | | | + | |ORA |
|VCC | |VCC | ||
|3v3 | |3v3 |
Latest revision as of 01:47, 1 July 2021
ILI9341 SPI TFT LCD Display Touch Panel
2.8 Inch ILI9341 240x320 SPI TFT LCD Display Touch Panel SPI Serial Port Module
Pins
Nailbuster Examples | |||||
---|---|---|---|---|---|
Label | Signal | {colour} | NodeMCU | Actual | |
14 | T_IRQ | BRN | D1 | GPIO5 | |
13 | T_DO | (MISO) | GRY | D6 | GPIO12 |
12 | T_DIN | (MOSI) | VIO | D7 | GPIO13 |
11 | T_CS | SPI select | BLU (t) | D8 | GPIO15 |
10 | T_CLK | SPI clk | WHI | D5 | GPIO14 |
9 | SDO(MISO) | (MISO) | GRY | D6 | GPIO12 |
8 | LED | pwr LED | RED | VCC | ? |
7 | SCK | SPI clk | WHI | D5 | GPIO14 |
6 | SDI(MOSI) | (MOSI) | VIO | D7 | GPIO13 |
5 | D/C | Data/Cmnd | GRN | D4 | GPIO2 |
4 | RESET | {D3} | YEL | VCC {D3} | 3v3 {GPIO0} |
3 | CS | SPI select | BLU (s) | D2 | GPIO4 |
2 | GND | pwr GND | BLK | GND | GND |
1 | VCC | pwr 3V3 | ORA | VCC | 3v3 |
(Why in hell do dev-board makers, & Arduino for that matter, think changing the actual GPIO numbers to some random shit was a good idea???)
Firmware
Seems to work pretty good with Tasmota-Display.
Links
- 2.8″ TOUCH LCD SPI FOR ESP8266 (NODEMCU)
- Code seems to work...
- Interfacing ESP8266 NodeMCU with ILI9341 TFT display
- Code seems to work...
- Once you add
#include <Arduino.h>
and#include <SPI.h>
- Aside from tripping over the WDT... :(
- tft.fillRect() seems to kick the watchdog.
- testFilledCircles() kicks the watchdog instead of returning.
- SOLUTION: Add
ESP.wdtFeed();
immediately before most calls to the shitty Adafruit library functions.
- Once you add
- Code seems to work...