Difference between revisions of "MCU - Display - TFT"
Jump to navigation
Jump to search
(→Pins) |
|||
| Line 24: | Line 24: | ||
|- | |- | ||
! | ! | ||
| + | !Label | ||
!Signal | !Signal | ||
| − | ! | + | !{colour} |
| − | |||
!NodeMCU | !NodeMCU | ||
!Actual | !Actual | ||
|- | |- | ||
| − | | | + | |14 |
|T_IRQ | |T_IRQ | ||
| | | | ||
| − | | | + | |WHI |
|D1 | |D1 | ||
|GPIO5 | |GPIO5 | ||
|- | |- | ||
| − | | | + | |13 |
|T_DO | |T_DO | ||
| − | | | + | |(MISO) |
| − | | | + | |GRY |
|D6 | |D6 | ||
|GPIO12 | |GPIO12 | ||
|- | |- | ||
| − | | | + | |12 |
|T_DIN | |T_DIN | ||
| − | | | + | |(MOSI) |
| − | | | + | |VIO |
|D7 | |D7 | ||
|GPIO13 | |GPIO13 | ||
|- | |- | ||
| − | | | + | |11 |
|T_CS | |T_CS | ||
| − | | | + | |SPI select |
| − | | | + | |BLU |
|D2 | |D2 | ||
|GPIO4 | |GPIO4 | ||
|- | |- | ||
| − | | | + | |10 |
|T_CLK | |T_CLK | ||
| − | | | + | |SPI clk |
| − | | | + | |GRN |
|D5 | |D5 | ||
|GPIO14 | |GPIO14 | ||
| Line 72: | Line 72: | ||
| | | | ||
|- | |- | ||
| − | | | + | |9 |
|SDO(MISO) | |SDO(MISO) | ||
| − | | | + | |(MISO) |
| − | | | + | |GRY |
|D6 | |D6 | ||
|GPIO12 | |GPIO12 | ||
|- | |- | ||
| − | | | + | |8 |
|LED | |LED | ||
| | | | ||
| − | | | + | |RED+ |
| − | |VCC | + | |<u>VCC</u> |
|3v3 | |3v3 | ||
|- | |- | ||
| − | | | + | |7 |
|SCK | |SCK | ||
| − | | | + | |SPI clk |
| − | | | + | |GRN |
|D5 | |D5 | ||
|GPIO14 | |GPIO14 | ||
|- | |- | ||
| − | | | + | |6 |
|SDI(MOSI) | |SDI(MOSI) | ||
| − | | | + | |(MOSI) |
| − | | | + | |VIO |
|D7 | |D7 | ||
|GPIO13 | |GPIO13 | ||
|- | |- | ||
| + | |5 | ||
| + | |D/C | ||
| | | | ||
| − | | | + | |ORA |
| − | |||
| − | |||
|D4 | |D4 | ||
|GPIO2 | |GPIO2 | ||
|- | |- | ||
| − | | | + | |4 |
|RESET | |RESET | ||
| | | | ||
| − | | | + | |YEL |
|VCC | |VCC | ||
|3v3 | |3v3 | ||
|- | |- | ||
| − | | | + | |3 |
|CS | |CS | ||
| − | | | + | |SPI select |
| − | | | + | |BRN |
|D8 | |D8 | ||
|GPIO15 | |GPIO15 | ||
|- | |- | ||
| − | | | + | |2 |
|GND | |GND | ||
| | | | ||
| − | | | + | |BLK |
|GND | |GND | ||
|GND | |GND | ||
|- | |- | ||
| − | | | + | |1 |
|VCC | |VCC | ||
| | | | ||
| − | | | + | |RED |
|VCC | |VCC | ||
|3v3 | |3v3 | ||
| Line 138: | Line 138: | ||
(Why in hell do dev-board makers, & Arduino for that matter, think changing the actual GPIO numbers to some random shit was a good idea???) | (Why in hell do dev-board makers, & Arduino for that matter, think changing the actual GPIO numbers to some random shit was a good idea???) | ||
| − | ==== Firmware ==== | + | ====Firmware==== |
Seems to work pretty good with Tasmota-Display. | Seems to work pretty good with Tasmota-Display. | ||
Revision as of 23:56, 24 November 2020
ILI9341 SPI TFT LCD Display Touch Panel
2.8 Inch ILI9341 240x320 SPI TFT LCD Display Touch Panel SPI Serial Port Module
Pins
| Nailbuster Examples | |||||
|---|---|---|---|---|---|
| Label | Signal | {colour} | NodeMCU | Actual | |
| 14 | T_IRQ | WHI | D1 | GPIO5 | |
| 13 | T_DO | (MISO) | GRY | D6 | GPIO12 |
| 12 | T_DIN | (MOSI) | VIO | D7 | GPIO13 |
| 11 | T_CS | SPI select | BLU | D2 | GPIO4 |
| 10 | T_CLK | SPI clk | GRN | D5 | GPIO14 |
| 9 | SDO(MISO) | (MISO) | GRY | D6 | GPIO12 |
| 8 | LED | RED+ | VCC | 3v3 | |
| 7 | SCK | SPI clk | GRN | D5 | GPIO14 |
| 6 | SDI(MOSI) | (MOSI) | VIO | D7 | GPIO13 |
| 5 | D/C | ORA | D4 | GPIO2 | |
| 4 | RESET | YEL | VCC | 3v3 | |
| 3 | CS | SPI select | BRN | D8 | GPIO15 |
| 2 | GND | BLK | GND | GND | |
| 1 | VCC | RED | VCC | 3v3 | |
(Why in hell do dev-board makers, & Arduino for that matter, think changing the actual GPIO numbers to some random shit was a good idea???)
Firmware
Seems to work pretty good with Tasmota-Display.
Links
- 2.8″ TOUCH LCD SPI FOR ESP8266 (NODEMCU)
- Code seems to work...
- Interfacing ESP8266 NodeMCU with ILI9341 TFT display
- Code seems to work...
- Once you add
#include <Arduino.h>and#include <SPI.h> - Aside from tripping over the WDT... :(
- tft.fillRect() seems to kick the watchdog.
- testFilledCircles() kicks the watchdog instead of returning.
- SOLUTION: Add
ESP.wdtFeed();immediately before most calls to the shitty Adafruit library functions.
- Once you add
- Code seems to work...
