Tinker at 03:21, 30 April 2021

2021-04-30T03:21:09Z

Tinker: Created page with "== I2C_functions.cpp == '''NOTE:''' The ESP version of the Arduino core has `printf()`, The Atmel version does not. If you want to use these functions on an Atme..."

2021-04-26T20:27:57Z

Created page with "== I2C_functions.cpp == '''NOTE:''' The ESP version of the Arduino core has <code>printf()</code>, The Atmel version does not. If you want to use these functions on an Atme..."

New page

== I2C_functions.cpp ==

'''NOTE:''' The ESP version of the Arduino core has <code>printf()</code>, The Atmel version does not. If you want to use these functions on an Atmel MCU, you'll have to re-write pretty much EVERY <code>Serial.printf()</code>...

<syntaxhighlight lang="c++" line="1">
#include "libraries.h"
#include "functions.h"
#include "debug.h"

void debug_TitleScreen()
{
Serial.printf("\n\n#================================================#\n");
Serial.printf("# %-46s #\n", DeviceName);
Serial.printf("# %-46s #\n", DeviceDesc);
Serial.printf("+------------------------------------------------+\n");
Serial.printf("# WiFi Enabled... #\n");
Serial.printf("# Speaks fluent MQTT... #\n");
Serial.printf("#================================================#\n");
}

void debug_ReadyScreen()
{
Serial.printf("#================================================#\n");
Serial.printf("# Ready To Run. #\n");
Serial.printf("#================================================#\n");
}

void debug_Separator()
{
Serial.printf("+------------------------------------------------+\n");
}

void debug_SectionTitle(const char *Title)
{
Serial.printf("| %-46s |\n", Title);
}

void debug_LineOut(const char *Line)
{
Serial.printf("| %-43s |\n", Line);
}

void debug_Action(const char *Line)
{
{
const char *SPACE = " ";
char BUFFER[100];
char BUFFER2[100];

int BuffSize = (23 - (strlen(Line) / 2));

strcpy(BUFFER, SPACE);
BUFFER[BuffSize] = '\0';

sprintf(BUFFER2, "%s%s", BUFFER, Line);
Serial.printf("| %-46s |\n", BUFFER2);
}
}

void debug_Trouble(const char *Line)
{
Serial.printf("* %-46s *\n", Line);
}

void debug_Success(const char *Line)
{
Serial.printf("+ %-46s +\n", Line);
}

void debug_ProgressBar0()
{
Serial.printf("| ");
}

void debug_ProgressBar1()
{
Serial.printf(".");
}

void debug_ProgressBar2(int dotcount)
{
for (int i = 0; i < (47 - dotcount); i++)
{
Serial.printf(" ");
}
Serial.printf("|\n");
}

void debug_ESP_info()
{
char Line[46];
// Check and report on the flash memory on this board
debug_SectionTitle("Board flash memory Info");
uint32_t realSize = ESP.getFlashChipRealSize();
uint32_t ideSize = ESP.getFlashChipSize();
FlashMode_t ideMode = ESP.getFlashChipMode();
sprintf(Line, "Flash real id: %08X", ESP.getFlashChipId());
debug_LineOut(Line);
sprintf(Line, "Flash real size: %u", realSize);
debug_LineOut(Line);
sprintf(Line, "Flash ide size: %u", ideSize);
debug_LineOut(Line);
sprintf(Line, "Flash ide speed: %u", ESP.getFlashChipSpeed());
debug_LineOut(Line);
sprintf(Line, "Flash ide mode: %s", (ideMode == FM_QIO ? "QIO" : ideMode == FM_QOUT ? "QOUT"
: ideMode == FM_DIO ? "DIO"
: ideMode == FM_DOUT ? "DOUT"
: "UNKNOWN"));
debug_LineOut(Line);
if (ideSize != realSize)
{
sprintf(Line, "Flash Chip configuration wrong!");
}
else
{
sprintf(Line, "Flash Chip configuration ok.");
}
debug_LineOut(Line);
}
</syntaxhighlight>

← Older revision		Revision as of 03:21, 30 April 2021
Line 1:		Line 1:
−	== ~~I2C_functions~~.cpp ==	+	==Debugging_functions.cpp==

	'''NOTE:''' The ESP version of the Arduino core has <code>printf()</code>, The Atmel version does not. If you want to use these functions on an Atmel MCU, you'll have to re-write pretty much EVERY <code>Serial.printf()</code>...		'''NOTE:''' The ESP version of the Arduino core has <code>printf()</code>, The Atmel version does not. If you want to use these functions on an Atmel MCU, you'll have to re-write pretty much EVERY <code>Serial.printf()</code>...

Some debugging functions - Revision history

Tinker at 03:21, 30 April 2021

Tinker: Created page with "== I2C_functions.cpp == '''NOTE:''' The ESP version of the Arduino core has printf(), The Atmel version does not. If you want to use these functions on an Atme..."

Tinker: Created page with "== I2C_functions.cpp == '''NOTE:''' The ESP version of the Arduino core has `printf()`, The Atmel version does not. If you want to use these functions on an Atme..."