View source for IoT - ESP-Everything! Programming adaptor

So...

With an assembled [[IoT - ESP-M3 Everything!|ESP-M3 Everything!]] board on hand, need a way to talk to these.

=== Temporary Expedient ===
Initially, a simple adaptor to use an existing [https://www.banggood.com/CJMCU-340-CH340G-TTL-To-USB-STC-Downloader-Serial-Communication-Module-Pin-All-Leads-p-1149176.html USB-Serial board]. (Guess I'll have to design my own next...  :P )

[[File:CJMCU top.jpg|none|thumb|alt=|I like these little CJMCU boards]]

[[File:CJMCU bottom.jpg|none|thumb|alt=|They do pretty near everything]]
& they're even breadboard friendly...

But, I need to be able to just poke my devices with it, so...
[[File:Pogo Pins.jpg|none|thumb|Pogo Pins in a Dupont shell!]]

[[File:Adaptor Layout.jpg|none|thumb|alt=|Attached to a bit of proto board along with sockets for the CJMCU board.]]

[[File:Adaptor Wiring.jpg|none|thumb|alt=|& wired appropriately.]]

[[File:Adaptor bottom.jpg|none|thumb|alt=|Pretty darn simple board...]]

[[File:Adaptor Ready.jpg|none|thumb|alt=|Ready to go]]

[[File:Adaptor Usage.jpg|none|thumb|alt=|In use...]]

=== The Plan Forward ===
To make these things really useful, it'd be nice to have a dedicated programming jig.

So I'm designing one.

Basically, it'll be a board with the exact same form as the ESP-Everything! boards themselves.  (of course, much of the contents of the board will be different.)  The programming header location will have short pogo pins in the pin header holes.

[[File:Programmer.png|none|thumb|alt=|A work in progress...]]